Live demo
Don't take our word for it — operate the twin right here.
Below are two real, working simulations running in your browser: a SCADA one-line of a hybrid park with breakers you can trip, and a 3D site twin with live equipment health. The console runs the same models against your actual telemetry.
SCADA · one-line HMI
Trip a feeder. Watch the ratings engine react.
Wind, solar and storage feed a 400 kV export line. The conductor heats with load and cools with wind exactly as IEEE 738 says it should — and the dynamic rating, alarms and flows respond in real time. Click any breaker.
Click any breaker to trip a feeder — the model, ratings and alarms respond.
109.1 MW flowingstatic 180 MW · marker
Alarm feed
- Simulation started — telemetry at 1 Hz
Ambient 18 °C · wind 10.4 m/s — the same inputs the real ratings engine consumes.
3D site twin
Every asset, its health and its sensors — in one scene.
The same site as a 3D twin: turbines spin at rotor speed, health states drift as telemetry moves, and clicking any asset pins its live tags. WTG-07 is developing the gearbox anomaly from our renewables use case.
Click equipment to pin its live tags. WTG-07 drifts into a gearbox watch state — just like the demo story.
WindTurbine WTG-07 · 3.6 MW
Healthy
- gearbox_temp_c
- 65.6 °C
- vib_mm_s
- 2.2 mm/s
- power_mw
- 2.5 MW
- rotor_rpm
- 12.9 rpm
In the console this scene is full WebGL: photogrammetry-scale sites, sensor pins, playback and alarm overlays — this is the browser-sized version.
The real thing
The console goes much further.
Full WebGL site twins, God's Eye network maps, playback, scenario studio and the action center — connected to your historians and SCADA.
A guided demo runs on the ten reference twins — or on a sanitised slice of your own telemetry within 90 days.See the value model →
See Digital Twin on your own network data.
A 45-minute working session with our grid engineers on a sanitised slice of your topology and telemetry, followed by a scoped 90-day pilot proposal.